Contact Us

GENTAUR Europe

 GENTAUR Europe BVBA
Voortstraat 49, 1910 Kampenhout BELGIUM
Tel 0032 16 58 90 45 
Fax 0032 16 50 90 45
This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it. 

Gentaur Bulgaria

 GENTAUR BULGARIA
53 Iskar Str. 1191 Kokalyane, Sofia
Tel 0035924682280 
Fax 0035929830072
This email address is being protected from spambots. You need JavaScript enabled to view it." style="">This email address is being protected from spambots. You need JavaScript enabled to view it.

    GENTAUR France

     GENTAUR France SARL
    9, rue Lagrange, 75005 Paris 
    Tel 01 43 25 01 50 
    Fax 01 43 25 01 60
    This email address is being protected from spambots. You need JavaScript enabled to view it." style="">This email address is being protected from spambots. You need JavaScript enabled to view it.
    This email address is being protected from spambots. You need JavaScript enabled to view it." style="">This email address is being protected from spambots. You need JavaScript enabled to view it.

    Gentaur Germany

    This email address is being protected from spambots. You need JavaScript enabled to view it." style="font-size: 12px; line-height: 1.3em;">

      GmbH Marienbongard 20
    52062 Aachen Deutschland
    Tel (+49) 0241 56 00 99 68 
    Fax (+49) 0241 56 00 47 88 This email address is being protected from spambots. You need JavaScript enabled to view it." style="font-family: Arial, Tahoma, Verdana, Helvetica; line-height: 15.59375px; ">
    This email address is being protected from spambots. You need JavaScript enabled to view it." style="">This email address is being protected from spambots. You need JavaScript enabled to view it.

    This email address is being protected from spambots. You need JavaScript enabled to view it." style="font-size: 12px; line-height: 1.3em;">

    This email address is being protected from spambots. You need JavaScript enabled to view it." style="">This email address is being protected from spambots. You need JavaScript enabled to view it.

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Gentaur London

     GENTAUR Ltd. 
    Howard Frank Turnberry House 
    1404-1410 High Road 
    Whetstone London N20 9BH 
    Tel 020 3393 8531 
    Fax 020 8445 9411
    This email address is being protected from spambots. You need JavaScript enabled to view it." style="">This email address is being protected from spambots. You need JavaScript enabled to view it.

    GENTAUR Poland

     GENTAUR Poland Sp. z o.o. 

    ul. Grunwaldzka 88/A m.2

    81-771 Sopot, Poland
    Tel  058 710 33 44
    Fax 058 710 33 48 
    This email address is being protected from spambots. You need JavaScript enabled to view it." style="">This email address is being protected from spambots. You need JavaScript enabled to view it.

    GENTAUR Nederland

     GENTAUR Nederland BV
    Kuiper 1 
    5521 DG Eersel Nederland
    Tel 0208-080893 
    Fax 0497-517897
    This email address is being protected from spambots. You need JavaScript enabled to view it." style="">This email address is being protected from spambots. You need JavaScript enabled to view it.

    Gentaur Italy

     GENTAUR SRL IVA IT03841300167

    Piazza Giacomo Matteotti, 6, 24122 Bergamo
    Tel 02 36 00 65 93 
    Fax 02 36 00 65 94
    This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

    GENTAUR Spain

     GENTAUR Spain
    Tel 0911876558
    This email address is being protected from spambots. You need JavaScript enabled to view it." style="">This email address is being protected from spambots. You need JavaScript enabled to view it.

    Genprice USA

    usa-flagGenprice Inc, Logistics
    547, Yurok Circle
    San Jose, CA 95123
    Phone/Fax: 

    (408) 780-0908 

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    skype chat

    GENPRICE Inc. invoicing/ accounting:
    6017 Snell Ave, Suite 357
    San Jose, CA. 96123

     

    Gentaur Serbia

    serbiaSerbia, Macedonia FlagMacedonia, 

    montenegro-flagMontenegro, croatiaCroatia: 
    Tel 0035929830070 
    Fax 0035929830072
    This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

    GENTAUR Romania

    romGENTAUR Romania

    Tel 0035929830070 
    Fax 0035929830072
    This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

    GENTAUR Greece

    grGENTAUR Greece 

    Tel 00302111768494 
    Fax 0032 16 50 90 45

    This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

    Other countries

    Other countries
    Luxembourg +35220880274
    Schweiz Züri +41435006251
    Danmark +4569918806
    Österreich +43720880899
    Ceská republika Praha +420246019719
    Ireland Dublin +35316526556
    Norge Oslo +4721031366
    Finland Helsset +358942419041
    Sverige Stockholm +46852503438
    Magyarország Budapest +3619980547

    seal-in-search-symantec

     

     

    Articles

    Microinjector

    PM 1000 Cell Microinjector

    PM 1000 Cell Microinjector-gentaur-antibodies

    The PM 1000 Cell Microinjector is just designed for cell microinjection and intracytoplasmic sperm injection (ICSI). It is very simple to use but comes with adequate precision functions for cell surgery.

    The PM 1000 is a very precise pneumatic microinjector. It can convert a single input pressure ( 30-100 psi ) to varied inject pressures and suction vacuums. All functions and timing are under control of a sophisticated microprocessor. There are two output ports on the front panel. The injection port can perform clearing, sucking, venting and adjustable capillary action balancing and injecting. The direct input pressure is used for clearing the inject pipette. The direct input pressure is also a source of suction vacuum generator which can provide negative pressure (suction) for the inject port. Another output port can produce a gentle and adjustable suction vacuum to hold a cell on a holding pipette tip. Also, a gentle and proportional smart pressure can be produce to push a cell out of the holding pipette tip without blow it off. Holding pipette clearing is available too.

    To achieve the simplicity and easy to use, only the injection time is manual controllable and programmable. All other functions are manually controlled. There are neither sequence steps, counters programming, nor mode switching.

    When turn on the injector power, the LCD will display only balance pressure, injection pressure and injection timer (or manual control). All actions are immediately ready. Although there is no programmable timer for clearing pipette, the clearing function is very smart : When the clear function key is pressed, the clear pressure will only pulse for a short time (10 millisecond) at the beginning. If the key is still pressed after three pulses, then the clear pressure will go on continually until the key is released.

    During injection, the LCD will display and record injection count. If it is manual control, the LCD will display time for acting injection as a stop watch. If injection timer control is needed, just one key pressing will switch between timer control or manual control. If programming timer is needed, also pressing one key will open another key set for number programming. The balance pressure, injection pressure, hold cell vacuum and pushing cell pressure are adjustable. The suction vacuum from the injection pipette is not adjustable. It is controlled by manual timing only.

    Besides the key pad, there is a foot switch input for the injection control. It is important and convenient that a foot can be used when both hands are busy on a microscope and manipulators. The exceptional precision and easy to use are essential of the PM1000. It is proved to be a very effective and convenient microinjector in the cell surgery

    PM2000 Programmable Cell Microinjector

    PM2000 Programmable Cell Microinjector-gentaur-antibodies

    The advantage of cell microinjection has changed the way that the scientists carry out in biomedical research and assisted fertilization (AF). The use of cell microinjection has become a major molecular and cellular technique and been considered as surgery on a single cell. Utilizing an advanced microcontroller and precision pneumatic components, the PM2000 is just designed as a very precise and smart pneumatic engine for microinjection. The PM2000 is obviously superior in precision, convenience and function versatility to a syringe pump. This superior pneumatic microinjector can combine with precisely pulled microscopic glass pipettes and micromanipulators to form an ideal operating tool in the cell surgery.

    The PM2000 can deliver from picolitter to unlimited wide range of liquid to a target. For microinjection in the biomedical research, the PM2000 can be used to inject any type of molecule or combination of molecules into the cytoplasm or nucleus. For example, RNA, DNA, proteins, antibodies, labelled dyes, synthetic molecules, peptides, and cell organelles all can be injected. Cell holding, transferring and even chromosome dissection can also be performed by using the PM2000. For the Intracytoplasmic Sperm Injection (ICSI), the PM2000 can be controlled precisely to pick up and transfer sperm. With a smooth and very fine adjustable suction, ejection and a computerize timing valve, every single sperm can be handled conveniently and precisely.

    PM 2000(B) 4-Channel Programmable Injector

    PM 2000B 4-Channel Programmable Injector-gentaur-antibodiesThe PM 2000(B) Programmable 4-Channel Pressure Injector is designed for intracellular injection and extracellular perfusion. It can be used for directly injecting different molecular agents, labelled dyes, genes, RNA, DNA, proteins and cell organelles to a cell, or performing a perfusion of up to 15 combinations from four different agents and drugs to a cell or a group of cells. It is also a superior device for intracytoplasmic sperm injection and cell electrophysiology. By combining an advanced microcontroller and precise pneumatic components, the PM 2000(B) can simultaneously control four injection micropipettes, one cell holding pipette and one drain pipette.

     

    PM 8000 Programmable 8-Channel Injector

    PM 8000 Programmable 8-Channel Injector-gentaur-antibodies

    The PM 8000 Programmable 8-Channel Pressure Injector is designed for single to eight channel intracellular injection and extracellular perfusion. It is an excellent microinjection and perfusion engine for pharmacological drug testing, molecular biological DNA, RNA transferring, intracytoplasmic sperm injection and cell electrophysiological applications. Combining an advanced microcontroller and precise pneumatic components, the PM 8000 can simultaneously control up to eight injection micropipettes or eight perfusion vials and one cell holding pipette and one drain pipette.