Contact Us

GENTAUR Europe

 GENTAUR Europe BVBA
Voortstraat 49, 1910 Kampenhout BELGIUM
Tel 0032 16 58 90 45 
Fax 0032 16 50 90 45
This email address is being protected from spambots. You need JavaScript enabled to view it.  

Gentaur Bulgaria

 GENTAUR BULGARIA
53 Iskar Str. 1191 Kokalyane, Sofia
Tel 0035924682280 
Fax 0035929830072
This email address is being protected from spambots. You need JavaScript enabled to view it.

    GENTAUR France
    Gentaur Germany

      GmbH Marienbongard 20
    52062 Aachen Deutschland
    Tel (+49) 0241 56 00 99 68 
    Fax (+49) 0241 56 00 47 88 
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    This email address is being protected from spambots. You need JavaScript enabled to view it.

     

    Gentaur London

     GENTAUR Ltd. 
    Howard Frank Turnberry House 
    1404-1410 High Road 
    Whetstone London N20 9BH 
    Tel 020 3393 8531 
    Fax 020 8445 9411
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    GENTAUR Poland

     GENTAUR Poland Sp. z o.o. 

    ul. Grunwaldzka 88/A m.2

    81-771 Sopot, Poland
    Tel  058 710 33 44
    Fax 058 710 33 48 
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    GENTAUR Nederland

     GENTAUR Nederland BV
    Kuiper 1 
    5521 DG Eersel Nederland
    Tel 0208-080893 
    Fax 0497-517897
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Gentaur Italy

     GENTAUR SRL IVA IT03841300167

    Piazza Giacomo Matteotti, 6, 24122 Bergamo
    Tel 02 36 00 65 93 
    Fax 02 36 00 65 94
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    GENTAUR Spain

     GENTAUR Spain
    Tel 0911876558
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Genprice USA
    Gentaur Serbia

    serbiaSerbia, Macedonia FlagMacedonia, 

    montenegro-flagMontenegro, croatiaCroatia: 
    Tel 0035929830070 
    Fax 0035929830072
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    GENTAUR Romania

    romGENTAUR Romania

    Tel 0035929830070 
    Fax 0035929830072
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    GENTAUR Greece

    grGENTAUR Greece 

    Tel 00302111768494 
    Fax 0032 16 50 90 45

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Other countries

    Other countries
    Luxembourg +35220880274
    Schweiz Züri +41435006251
    Danmark +4569918806
    Österreich +43720880899
    Ceská republika Praha +420246019719
    Ireland Dublin +35316526556
    Norge Oslo +4721031366
    Finland Helsset +358942419041
    Sverige Stockholm +46852503438
    Magyarország Budapest +3619980547

    seal-in-search-symantec

     

     

    Articles

    Mini See-saw (wave) Rockers

    MIN SEE SAW-500x500

    Applications:

    Different from 3D gyration motion, the ASRM7 and ASRM8 use a see-saw motion to create wave-like mixing process. These rockers are suitable for mixing various flat bottles, such as culture flasks, Petri dishes etc. .

    With smaller footprint, but the high driving force, more platforms can be added by stacking two more platforms to accommodate more samples.

    There are two models for this type of the rocker: Both of them are microprocessor controlled. The digital model (ASRM8) provides digital timer with up to 9 hours setting and speed control in 1rpm increment.

    The ASRM7 model provides 2-hours timers (in 10 minute integral) and 10 steps speed control without digital display as shown in MOS.

    The ASRM8 model provides a good safety feature: when the motor stalled or overload, the unit will stop, beep and show error message in the LED display.

    Technical Specification:

    Model

    ASRM7

    ASRM8

    Speed range (rpm)

    5 to 70

    5 to 70

    Rocking type

    See-saw, wave

    Platform dimensions (mm, WXL)

    235x235

    Tilting Angle (degree)

    7

    Angle adjustable

    No, fixed at 7º

    Timer (min)

    120

    digital, 540

    Speed control mode

     10 integral selection

    digital in 1 rpm increment

    Maximum load (KG)

    10

    Dimensions (mm, WXDXH)

    240x300x180

    Operation temp. Range (°C )

    +4 to +40

    Maximum operation humidity

    80%

    Net weight (KG)

    6

    Power supply

    230V, 50Hz, 50W

     

    Lab Scale See-saw (wave) Rockers

    see saw-500x500

    Application:

    The ASRL3 and ASRL4 use a see-saw motion to create wave-like mixing process. The mixers are specially design for any flat vessels, such as culture flasks, Petri dishes etc., generating a gentle and full mixing action.

    More platforms can be added to the rockers by adding stacking system to accommodate more samples.

    There are two models for this type of the rocker: Both of them are microprocessor controlled. The digital model (ASRL4) provides digital timer with up to 9 hours setting and speed control in 1rpm increment.

    The ASRL3 model provides 2-hours timers (in 10 minute integral) and 10 steps speed control without digital display as shown in MOS.

    The ASRL4 model provides a good safety feature: when the motor stalled or overload, the unit will stop, beep and show error message in the LED display.

    Technical Specification:

    Model

    ASRL3

    ASRL4

    Speed Range (rpm)

    5 to 70

     5 to 70

    Rocking Type

    See-saw, wave

    See-saw, wave

    Platform Dimensions (mm, WXL)

    355x355

    355x355

    Tilting Angle (degree)

    7

    7

    Angle Adjustable

    No, fixed at 7º

    No, fixed at 7º

    Timer (min)

    120

    Digital 540

    Speed Control Mode

    10 integral selection

    digital in 1 rpm increment

    Maximum Load (KG)

    10

    10

    Dimensions (mm, WXLXH)

    360x420x180

    360x420x180

    Operation Temp. Range (°C )

    +4 to +40

    +4 to +40

    Maximum Operation Humidity

    80%

    80%

    Net Weight (KG)

    10

    10

    Power Supply

    230V, 50Hz, 50W

     

    Lab Scale 3D Gyration Rockers

    L 3D-500x500

    Application:

    The 3D gyration rockers are designed to generate in three dimension rocking motion with smooth and full mixing action. The rockers are ideal for low foaming agitating, and widely used in DNA extractions, staining and de-staining procedures.

    The tilted angle can be adjusted manually from 3 to 12 degree. With a large platform, the rockers can accommodate large vessels such as culture flasks, petri dishes etc. The non-slip matt on the tray can prevent vessels slipping away during agitation.

    Rockers are often used in conjunction with incubators and environmental chambers and can be used in temperatures up to 40°C and humidity up to 80%.

    There are two models for this type of the rocker: Both of them are microprocessor controlled. The digital model (AGRL2) provides digital timer with up to 9 hours setting and speed control in 1rpm increment.

    The AGRL1 model provides 2-hours timers (in 10 minute integral) and 10 steps speed control without digital display as shown in MOS.

    The AGRL2 model provides a good safety feature: when the motor stalled or overload, the unit will stop, beep and show error message in the LED display.

    Technical Specification:

    Model

    AGRL1

    AGRL2

    Speed Range (rpm)

    5 to 70

     5 to 70

    Rocking Type

    3D gyration

    3D gyration

    Platform Dimensions (mm, WXL)

    355x355

    355x355

    Tilting Angle (degree)

    3-12

    3-12

    Angle Adjustable

    YES

    YES

    Timer (min)

    120

    Digital 540

    Speed Control Mode

    10 integral selection

    digital in 1 rpm increment

    Maximum Load (KG)

    10

    10

    Dimensions (mm, WXLXH)

    360x420x210

    360x420x210

    Operation Temp. Range (°C )

    +4 to +40

    +4 to +40

    Maximum Operation Humidity

    80%

    80%

    Net Weight (KG)

    10

    10

    Power Supply

    230V, 50Hz, 50W

     

    Mini 3D Gyration Rockers

    MIN 3D-500x500

    Application:

    AGRM5 and AGRM6 are personal rockers which have small platforms to accommodate lesser samples than the lab scale – AGRL. With smaller footprint, but the same motor drive as the AGRL model, more platforms can be added by stacking two more platforms to accommodate more samples.

    There are two models for this type of the rocker: Both of them are microprocessor controlled. The digital model (AGRM6) provides digital timer with up to 9 hours setting and speed control in 1rpm increment.

    The AGRM5 model provides 2-hours timers (in 10 minute integral) and 10 steps speed control without digital display as shown in MOS.

    The AGRM6 model provides a good safety feature: when the motor stalled or overload, the unit will stop, beep and show error message in the LED display.

    Technical Specification:

    Model

    AGRM5

    AGRM6

    Speed range (rpm)

    35 to 70

    5 to 70

    Rocking type

    3D gyratory

    3D gyratory

                Platform dimensions (mm, WXL)

    235x235

    Tilting Angle (degree)

    3 to 12

    Angle adjustable

    Yes

    Timer (min)

    120

    digital, 540

    Speed control mode

    10 integral selection

    digital in 1 rpm

    Maximum load (KG)

    10

                    Dimensions (mm,WXDXH)

    240x300x210

                   Operation temp. Range (°C )

    +4 to +40

                   Maximum operation humidity

    80%

    Net weight (KG)

    6

    Power supply

    230V, 50Hz