Suppliers
Contact Us
GENTAUR Europe BVBA Voortstraat 49, 1910 Kampenhout BELGIUM Tel 0032 16 58 90 45 Fax 0032 16 50 90 45 This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it. |
GENTAUR BULGARIA
53 Iskar Str. 1191 Kokalyane, Sofia
Tel 0035924682280
Fax 0035929830072
This email address is being protected from spambots. You need JavaScript enabled to view it." style="">This email address is being protected from spambots. You need JavaScript enabled to view it.
GENTAUR France SARL
9, rue Lagrange, 75005 Paris
Tel 01 43 25 01 50
Fax 01 43 25 01 60
This email address is being protected from spambots. You need JavaScript enabled to view it." style="">This email address is being protected from spambots. You need JavaScript enabled to view it.
This email address is being protected from spambots. You need JavaScript enabled to view it." style="">This email address is being protected from spambots. You need JavaScript enabled to view it.
GmbH Marienbongard 20
52062 Aachen Deutschland
Tel (+49) 0241 56 00 99 68
Fax (+49) 0241 56 00 47 88 This email address is being protected from spambots. You need JavaScript enabled to view it." style="font-family: Arial, Tahoma, Verdana, Helvetica; line-height: 15.59375px; ">
This email address is being protected from spambots. You need JavaScript enabled to view it." style="">This email address is being protected from spambots. You need JavaScript enabled to view it.
This email address is being protected from spambots. You need JavaScript enabled to view it." style="font-size: 12px; line-height: 1.3em;">
This email address is being protected from spambots. You need JavaScript enabled to view it." style="">This email address is being protected from spambots. You need JavaScript enabled to view it.
This email address is being protected from spambots. You need JavaScript enabled to view it.
GENTAUR Ltd.
Howard Frank Turnberry House
1404-1410 High Road
Whetstone London N20 9BH
Tel 020 3393 8531
Fax 020 8445 9411
This email address is being protected from spambots. You need JavaScript enabled to view it." style="">This email address is being protected from spambots. You need JavaScript enabled to view it.
GENTAUR Poland Sp. z o.o.
ul. Grunwaldzka 88/A m.2
81-771 Sopot, Poland
Tel 058 710 33 44
Fax 058 710 33 48
This email address is being protected from spambots. You need JavaScript enabled to view it." style="">This email address is being protected from spambots. You need JavaScript enabled to view it.
GENTAUR Nederland BV
Kuiper 1
5521 DG Eersel Nederland
Tel 0208-080893
Fax 0497-517897
This email address is being protected from spambots. You need JavaScript enabled to view it." style="">This email address is being protected from spambots. You need JavaScript enabled to view it.
GENTAUR SRL IVA IT03841300167
Piazza Giacomo Matteotti, 6, 24122 Bergamo
Tel 02 36 00 65 93
Fax 02 36 00 65 94
This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
GENTAUR Spain
Tel 0911876558
This email address is being protected from spambots. You need JavaScript enabled to view it." style="">This email address is being protected from spambots. You need JavaScript enabled to view it.
Genprice Inc, Logistics
547, Yurok Circle
San Jose, CA 95123
Phone/Fax:
(408) 780-0908
This email address is being protected from spambots. You need JavaScript enabled to view it.
GENPRICE Inc. invoicing/ accounting:
6017 Snell Ave, Suite 357
San Jose, CA. 96123
Serbia, Macedonia,
Montenegro, Croatia:
Tel 0035929830070
Fax 0035929830072
This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
GENTAUR Romania
Tel 0035929830070
Fax 0035929830072
This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
GENTAUR Greece
Tel 00302111768494
Fax 0032 16 50 90 45
This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
Other countries
Luxembourg +35220880274
Schweiz Züri +41435006251
Danmark +4569918806
Österreich +43720880899
Ceská republika Praha +420246019719
Ireland Dublin +35316526556
Norge Oslo +4721031366
Finland Helsset +358942419041
Sverige Stockholm +46852503438
Magyarország Budapest +3619980547
Power Supply Accessories
Whether you require a power supply for routine horizontal DNA agarose gel electrophoresis, or for techniques as technically demanding as SSCP analysis within a large format vertical, or first dimension IEF using IPG strips, Gentaur can meet your requirements with its comprehensive range of power supplies. Each power supply has a compact design, which means a small footprint in the laboratory, while explanatory self-prompting menus make set up easy.
Power Supply Adaptors
Product Description
Gentaur provides three types of power supply adaptor to ensure full compatibility between Gentaur gel tanks and power supplies from different manufacturers. These are as follows:
CSL-4-4 - extends the length of the standard electrode cables (CSL-CAB) of Gentaur mulitSUB or omniPAGE systems to fit within the deeply recessed power outputs of 1010-1 compliant power supplies. (4-to-4mm)
CSL-4-2 - allows Gentaur multiSUB and omniPAGE systems to be run from high voltage power supplies with 2mm outputs. (4-to-2mm)
CSL-2-4 - connects the CSL-CAB2 cables supplied with the CSL-IEF and large format CSQ verticals to low-to-medium voltage power supplies e.g. CS-500V. (2-to-4mm)
- Variant:
- Adapters, 4mm to 4mm, Pk/2 (CSL-4-4)
- Adapters, 4mm to 2mm, Pk/2 (CSL-4-2)
- Adapters, 2mm to 4mm, Pk/2 (CSL-2-4)
Replacement CSQ and CSL-IEF Cable
Product Description
Power cables with 4mm connectors compatible with most modern low-to-medium voltage power supplies; CE compliant (1).
Adaptors available for complete power supply compatibility.
Variant:
Replacement cables for CSQ Large Format Vertical Units, Pk/2 (CSL-CAB2)
Electrophoresis Cable
Product Description
Power cables with 4mm connectors compatible with most modern low-to-medium voltage power supplies; CE compliant (1).
Adaptors available for complete power supply compatibility.
Variant:
Electrophoresis cable (Black & Red) (CSL-CAB)
Consort Power Supplies
All Consort Maxi Series (EV200) power supplies have four output terminals for up to four simultaneous runs. Powerful microprocessor control allows complex programming, while manual mode permits the setting of voltage, current, power and time for routine electrophoretic runs. The parameters may also be changed temporarily without interrupting the run.
Consort Maxi EV202 Power Supply 300V – 2000MA – 300 Watts
Product Description
All Consort Maxi Series (EV200) power supplies have four output terminals to allow up to four simultaneous runs. Powerful microprocessor control allows complex programming, while manual mode permits the setting of voltage, current, power and time for routine electrophoretic runs. The parameters may also be changed temporarily without interrupting the run.
Programming - up to 9 different programs, each with 9 steps, can be stored in the non-volatile memory for future recall.
Timer - can be set to automatically terminate the run and sound an alarm when the allocated time or volt hours has elapsed.
Automatic cross-over - each model has constant voltage, constant current and constant power capabilities with automatic cross-over while showing which parameter is kept constant.
Automatic recovery after mains failure - after restoration of power, the instrument will automatically continue the run for the remaining time.
Data Transfer - optional data acquisition/control software for PC is available to view and examine the stored run details, store and program the methods, add notes to the run, identify the unit, copy or delete programs in the unit memory.
Safety precautions - the AC line is automatically disconnected from the high voltage transformer when a ground leakage path is detected protecting the user from potential shock.
Other safety features include protection against any overload including accidental short circuit of the output and voltage increases smoothly.
Variant:
Maxi Power Supply, 4 Outputs, 300Volts, 2000 mAmps, 300 watts (replaces E802) - 110V (EV202$)
Consort Maxi EV215 Power Supply 1200V – 500MA – 300 Watts
Product Description
All Consort Maxi Series (EV200) power supplies have four output terminals to allow up to four simultaneous runs. Powerful microprocessor control allows complex programming, while manual mode permits the setting of voltage, current, power and time for routine electrophoretic runs. The parameters may also be changed temporarily without interrupting the run.
Programming - up to 9 different programs, each with 9 steps, can be stored in the non-volatile memory for future recall.
Timer - can be set to automatically terminate the run and sound an alarm when the allocated time or volt hours has elapsed.
Automatic cross-over - each model has constant voltage, constant current and constant power capabilities with automatic cross-over while showing which parameter is kept constant.
Automatic recovery after mains failure - after restoration of power, the instrument will automatically continue the run for the remaining time.
Data Transfer - optional data acquisition/control software for PC is available to view and examine the stored run details, store and program the methods, add notes to the run, identify the unit, copy or delete programs in the unit memory.
Safety precautions - the AC line is automatically disconnected from the high voltage transformer when a ground leakage path is detected protecting the user from potential shock.
Other safety features include protection against any overload including accidental short circuit of the output and voltage increases smoothly.
Variant:
Maxi Power Supply, 4 Outputs, 1200Volts, 500 mAmps, 300 watts (replaces E815) - 230V (EV215)
Consort Mini EV222 Power Supply 200V – 200MA – 20 Watts
Product Description
The Consort Mini EV222 and EV243 power supplies are ideally suited for use with small electrophoresis units. Both power supplies, which occupy little space within the laboratory, are portable and have several other features:
Manual Set-up - voltage, current and power settings can be adjusted during the run.
Voltage ramp - this allows a linear voltage gradient for any step to be programmed at any step.
Automatic recovery after power failure – after restoration of power, the instrument will automatically continue the run for the remaining time.
3 output terminals.
The EV243 also benefits from 9 different programs, each with 9 steps; data-logging and data transfer to a PC, and PC remote control.
Variant:
Mini Power Supply, 3 Outputs, 200Volts, 200 mAmps, 20 watts - 230V (EV222)
Consort Maxi EV231 Power Supply 300V – 1000MA – 150 Watts
Product Description
All Consort Maxi Series (EV200) power supplies have four output terminals to allow up to four simultaneous runs. Powerful microprocessor control allows complex programming, while manual mode permits the setting of voltage, current, power and time for routine electrophoretic runs. The parameters may also be changed temporarily without interrupting the run.
Programming - up to 9 different programs, each with 9 steps, can be stored in the non-volatile memory for future recall.
Timer - can be set to automatically terminate the run and sound an alarm when the allocated time or volt hours has elapsed.
Automatic cross-over - each model has constant voltage, constant current and constant power capabilities with automatic cross-over while showing which parameter is kept constant.
Automatic recovery after mains failure - after restoration of power, the instrument will automatically continue the run for the remaining time.
Data Transfer - optional data acquisition/control software for PC is available to view and examine the stored run details, store and program the methods, add notes to the run, identify the unit, copy or delete programs in the unit memory.
Safety precautions - the AC line is automatically disconnected from the high voltage transformer when a ground leakage path is detected protecting the user from potential shock.
Other safety features include protection against any overload including accidental short circuit of the output and voltage increases smoothly.
Variant:
Maxi Power Supply, 4 Outputs, 300Volts, 1000 mAmps, 150 watts (Replaces E831) - 230V (EV231)
Consort Maxi EV232 Power Supply 3000V – 150MA – 150 Watts
Product Description
All Consort Maxi Series (EV200) power supplies have four output terminals to allow up to four simultaneous runs. Powerful microprocessor control allows complex programming, while manual mode permits the setting of voltage, current, power and time for routine electrophoretic runs. The parameters may also be changed temporarily without interrupting the run.
Programming - up to 9 different programs, each with 9 steps, can be stored in the non-volatile memory for future recall.
Timer - can be set to automatically terminate the run and sound an alarm when the allocated time or volt hours has elapsed.
Automatic cross-over - each model has constant voltage, constant current and constant power capabilities with automatic cross-over while showing which parameter is kept constant.
Automatic recovery after mains failure - after restoration of power, the instrument will automatically continue the run for the remaining time.
Data Transfer - optional data acquisition/control software for PC is available to view and examine the stored run details, store and program the methods, add notes to the run, identify the unit, copy or delete programs in the unit memory.
Safety precautions - the AC line is automatically disconnected from the high voltage transformer when a ground leakage path is detected protecting the user from potential shock.
Other safety features include protection against any overload including accidental short circuit of the output and voltage increases smoothly.
Variant:
Maxi Power Supply, 4 Outputs, 3000Volts, 150 mAmps, 150 watts (Replaces E832) - 230V (EV232)
Consort Maxi EV233 Power Supply 3000V – 300MA – 300 Watts
Product Description
All Consort Maxi Series (EV200) power supplies have four output terminals to allow up to four simultaneous runs. Powerful microprocessor control allows complex programming, while manual mode permits the setting of voltage, current, power and time for routine electrophoretic runs. The parameters may also be changed temporarily without interrupting the run.
Programming - up to 9 different programs, each with 9 steps, can be stored in the non-volatile memory for future recall.
Timer - can be set to automatically terminate the run and sound an alarm when the allocated time or volt hours has elapsed.
Automatic cross-over - each model has constant voltage, constant current and constant power capabilities with automatic cross-over while showing which parameter is kept constant.
Automatic recovery after mains failure - after restoration of power, the instrument will automatically continue the run for the remaining time.
Data Transfer - optional data acquisition/control software for PC is available to view and examine the stored run details, store and program the methods, add notes to the run, identify the unit, copy or delete programs in the unit memory.
Safety precautions - the AC line is automatically disconnected from the high voltage transformer when a ground leakage path is detected protecting the user from potential shock.
Other safety features include protection against any overload including accidental short circuit of the output and voltage increases smoothly.
Variant:
Maxi Power Supply, 4 Outputs, 3000Volts, 300 mAmps, 300 watts (replaces E833) -230V (EV233)
Consort Mini EV243 Power Supply 400V – 300MA – 50 Watts
Product Description
The Consort Mini EV222 and EV243 power supplies are ideally suited for use with small electrophoresis units. Both power supplies, which occupy little space within the laboratory, are portable and have several other features:
Manual Set-up - voltage, current and power settings can be adjusted during the run.
Voltage ramp - this allows a linear voltage gradient for any step to be programmed at any step.
Automatic recovery after power failure - after restoration of power, the instrument will automatically continue the run for the remaining time.
3 output terminals.
The EV243 also benefits from 9 different programs, each with 9 steps; data-logging and data transfer to a PC, and PC remote control.
Variant:
Discontinued Replaced by EV245 (EV243)
Consort Maxi EV261 Power Supply 600V – 1000MA – 300 Watts
Product Description
All Consort Maxi Series (EV200) power supplies have four output terminals to allow up to four simultaneous runs. Powerful microprocessor control allows complex programming, while manual mode permits the setting of voltage, current, power and time for routine electrophoretic runs. The parameters may also be changed temporarily without interrupting the run.
Programming - up to 9 different programs, each with 9 steps, can be stored in the non-volatile memory for future recall.
Timer - can be set to automatically terminate the run and sound an alarm when the allocated time or volt hours has elapsed.
Automatic cross-over - each model has constant voltage, constant current and constant power capabilities with automatic cross-over while showing which parameter is kept constant.
Automatic recovery after mains failure - after restoration of power, the instrument will automatically continue the run for the remaining time.
Data Transfer - optional data acquisition/control software for PC is available to view and examine the stored run details, store and program the methods, add notes to the run, identify the unit, copy or delete programs in the unit memory.
Safety precautions - the AC line is automatically disconnected from the high voltage transformer when a ground leakage path is detected protecting the user from potential shock.
Other safety features include protection against any overload including accidental short circuit of the output and voltage increases smoothly.
Variant:
Maxi Power Supply, 4 Outputs, 600Volts, 1000 mAmps, 300 watts (replaces E861) - 230V (EV261)
Consort Maxi EV262 Power Supply 6000V – 150MA – 300 Watts
Product Description
All Consort Maxi Series (EV200) power supplies have four output terminals to allow up to four simultaneous runs. Powerful microprocessor control allows complex programming, while manual mode permits the setting of voltage, current, power and time for routine electrophoretic runs. The parameters may also be changed temporarily without interrupting the run.
Programming - up to 9 different programs, each with 9 steps, can be stored in the non-volatile memory for future recall.
Timer - can be set to automatically terminate the run and sound an alarm when the allocated time or volt hours has elapsed.
Automatic cross-over - each model has constant voltage, constant current and constant power capabilities with automatic cross-over while showing which parameter is kept constant.
Automatic recovery after mains failure - after restoration of power, the instrument will automatically continue the run for the remaining time.
Data Transfer - optional data acquisition/control software for PC is available to view and examine the stored run details, store and program the methods, add notes to the run, identify the unit, copy or delete programs in the unit memory.
Safety precautions - the AC line is automatically disconnected from the high voltage transformer when a ground leakage path is detected protecting the user from potential shock.
Other safety features include protection against any overload including accidental short circuit of the output and voltage increases smoothly.
Variant:
Maxi Power Supply, 4 Outputs, 6000Volts, 150 mAmps, 300 watts (replaces E862) - 230V (EV262)
Consort Maxi EV265 Power Supply 600V – 500MA – 150 Watts
Product Description
All Consort Maxi Series (EV200) power supplies have four output terminals to allow up to four simultaneous runs. Powerful microprocessor control allows complex programming, while manual mode permits the setting of voltage, current, power and time for routine electrophoretic runs. The parameters may also be changed temporarily without interrupting the run.
Programming - up to 9 different programs, each with 9 steps, can be stored in the non-volatile memory for future recall.
Timer - can be set to automatically terminate the run and sound an alarm when the allocated time or volt hours has elapsed.
Automatic cross-over - each model has constant voltage, constant current and constant power capabilities with automatic cross-over while showing which parameter is kept constant.
Automatic recovery after mains failure - after restoration of power, the instrument will automatically continue the run for the remaining time.
Data Transfer - optional data acquisition/control software for PC is available to view and examine the stored run details, store and program the methods, add notes to the run, identify the unit, copy or delete programs in the unit memory.
Safety precautions - the AC line is automatically disconnected from the high voltage transformer when a ground leakage path is detected protecting the user from potential shock.
Other safety features include protection against any overload including accidental short circuit of the output and voltage increases smoothly.
Variant:
Maxi Power Supply, 4 Outputs, 600Volts, 500 mAmps, 150 watts (replaces E865 and E863) - 230V (EV265)
OmniPAC Power Supplies
Whatever your requirements, they can be met with Gentaur ‘s comprehensive range of OmniPAC power supplies. The compact design of each power supply means it has a small footprint area, while explanatory self-prompting menus make set up easy. Furthermore, these power supplies adhere to IEC 61010 – one of the world’s most stringent electrical safety standards.
nanoPAC-300 MINI Power Supply
Product Description
Superseding the MINI150V and MINI300V as the omniPAC MINI power supply of choice, the new nanoPAC-300 offers many of the benefits of the omniPAC MIDI power supplies for the price of an omniPAC MINI unit. With enhanced features, such as a maximum constant current output of 400mA, in addition to constant voltage up to 300V, the nanoPAC-300 is capable of running all Cleaver Scientific horizontal multiSUB systems and vertical omniPAGE mini gels, either on a continuous run or timed setting up to 999 minutes.
The nanoPAC-300′s user-friendly interface is easily adjustable in 1V and 1mA increments, making it perfect for separations where precise settings are required, while its ultra compact size and two pairs of parallel power terminals, which can run two electrophoresis units simultaneously, save time and bench space. A dual voltage rating ensures full portability, and allows easy transportation between laboratories irrespective of their geographical location, to make these power supplies ideally suited to today’s researcher.
Variant:
omniPAC MIDI CS-300V
Product Description
At 700mA and 150W, nearly twice the current and power of the market leading equivalent unit, the CS-300V offers a specification comparable to any other midi power supply presently available. The CS-300V is perfectly suited to use with all Cleaver Scientific horizontal multiSUB systems and omniPAGE mini vertical gel units, and may also be adapted for specialist techniques including the Comet Assay, and clinical and high throughput horizontal electrophoresis.
Microprocessor control with four sets of power terminals allow simultaneous operation of as many electrophoresis units, either at a constant voltage or current setting, while the timer function may be set continuously or up to a maximum 999 minutes when an alarm sounds to signify termination of the run. A user-friendly interface houses a conspicuous 3-digit LED to aid set up, as well as a convenient pause/resume key; a particularly useful feature during extended runs when it is necessary to access the gel tank to monitor buffer levels and sample migration. Given its high specification and remarkable versatility the CS-300V is relatively inexpensive.
Variant:
OmniPAC, MIDi 300V 700mA 150W - 110/230V (CS-300V)
omniPAC MAXI CS-500V
Product Description
With a maximum 500V, 800mA and 300W voltage, current and power output, the omniPAC CS-500V MAXI is an excellent general purpose power supply that fits the broadest range of electrophoresis applications, and can run as many as four units under a constant or programmable setting. It has the capacity to store up to 30 programmed files, each with 6 steps. This makes the CS-500V perfect for techniques that benefit from subtle and gradual stepwise changes in the electrical parameters as the run progresses, such as DGGE and large format vertical PAGE using Cleaver Scientific VS20-DGGE and WAVE systems.
A large 2.6 screen shows within 2 lines the real-time values of the electrical parameters during the run, along with the program file and individual step in operation, enabling the user to appraise the entire run at a single glance. The CS-500V MAXI is also equipped as standard with many features associated with the omniPAC MIDI, including timer and alarm, pause/resume functionality, a stackable design and enhanced in-built safety features.
Variant:
OmniPAC, MAXi 500V 400mA 200W - 110/230V (CS-500V)
omniPAC MAXI CS-3AMP
Product Description
At 300V, 3000mA, 300W, the omniPAC MAXI CS-3AMP is designed for virtually all high current electrophoresis applications. The CS-3AMP’s higher current output capability is perfect for electroblotting units with high-intensity plate electrodes, particularly Cleaver Scientific omniBLOT maxi, VS20 WAVE and semi dry blotting systems. Electrotransfers may be performed as timed runs in constant or programmable mode to prevent overheating and buffer depletion. A run time extendable to a maximum 999 minutes in constant mode is also useful for overnight transfers undertaken at constant low current in wire electrode systems.
The two-line 2.6 LCD screen allows the experimental parameters, program file and step to be viewed within a single screen during each run, while the CS-3AMP’s four power terminals and robust current and power outputs make it suitable for high throughput SDS-PAGE using multiple vertical systems. The CS-3AMP shares the same standard features as the omniPAGE MAXI CS-500V.
Variant:
OmniPAC, MAXi 300V 3000mA 300W - 110/230V (CS-3AMP)