Flatbed IEF System

Product Description

Now equipped with rehydration and focusing trays, the redesigned CSL-IEF has been optimised to perform first-dimension isoelectric focusing (IEF) with IPG (immobilised pH gradient) strips quickly, easily and reproducibly.

An ideal entry-level system for both inexperienced and occasional IEF users, the CSL-IEF is also versatile enough to meet the needs of laboratories with increased throughput requirements.

Features include:

• A high-capacity focusing tray that accommodates up to twelve IPG strips
• Adjustable pick-and-place electrodes clip conveniently anywhere within the focusing tray to resolve IPG strips 7-24cm in length; colour-coded to prevent polarity reversal
• A cooling plate, manufactured from a special grade ceramic in a large 26x26cm surface area, facilitates effective heat dissipation and homogenous thermal control, particularly during high voltage IEF techniques
• An optional, but recommended, Gentaur recirculating chiller connects quickly and easily to the cooling plate via snap-lock connectors to maintain optimal operating temperatures for IPG strips (20) and precast gels (4)
• Rehydration tray allows convenient transfer of IPG strips to the focusing tray without time-consuming removal of residual rehydration buffer; also enables focusing tray to remain permanently in use for IEF to maximise throughput, and provides useful storage at -20 for focused strips before second-dimension runs
• Electrode frame clips directly on to the cooling plate and includes adjustable electrodes to run horizontal precast IEF and PAGE gels

Variant:

• CSL-IEF - Flatbed IEF system for IEF strips and gels

2D Systems

The OmniPAGE 2-D Systems include both modules required for Slab Gel and First Dimension Electrophoresis and accessories, to provide a complete Mini, Mini Wide or Maxi 2-D system. The Tube Gel Module includes a rapid release gasket for easy tube extraction. Focusing can be accomplished in as little as three hours in the Mini unit. Disposable capillary tubes are included for added convenience, plus 2-D combs and spacers which are colour coded according to thickness for easy identification.

OmniPAGE Maxi Plus

 

Product Description

The omniPAGE VS30 maxi-plus large format vertical has been designed as a convenient unit for second-dimension PAGE following first-dimension isoelectric focusing using the CSL-IEF. An active gel width of 26cm easily accommodates IPG strips up to 24cm in length, the longest available commercially, while an extended gel height of 22cm maximises separation distance and resolution of proteins similar in size or isoelectric point (pI). In combination with the CSL-IEF, the VS30DSYS provides a complete 2-D electrophoresis system which utilises the advanced features of the omniPAGE range to produce a unit that is both easy to use and consistent in generating reproducible results.

Rapid set-up cooling retains resolution in extended separations and also conserves buffer volume without affecting run quality. A maximum of four 1-mm-thick gels may be resolved per run, using notched glass plates with 1mm bonded spacers; and a comprehensive range of accessories facilitate easy interchange between 2-D and standard vertical electrophoresis techniques. Different types of 2-D comb offer a wide degree of versatility in sample selection and gel set-up.

Variants

• VS30DomniPAGE Maxi Plus, 30 x 22cm Dual with Glass Plates with bonded 1.5mm spacers, 2 x 28 sample combs, 2 x 2-D combs, cooling pack, dummy plate
• VS30DSYSomniPAGE Maxi Plus, 30 x 22cm Dual with Glass Plates with bonded 1.5mm spacers, 2 x 28 sample combs, 2 x 2-D combs, cooling pack, dummy plate and casting base

Complete 2-D Systems – Mini to Maxi

 

Product Description

The omniPAGE 2-D Systems include both modules required for Slab Gel and First Dimension Electrophoresis and accessories, to provide a complete Mini, Mini Wide or Maxi 2-D system. The Tube Gel Module includes a rapid release gasket for easy tube extraction. Focusing can be accomplished in as little as three hours in the Mini Unit. Disposable capillary tubes are included for added convenience, plus 2-D combs and spacers which are colour coded according to thickness for easy identification.

Package includes:

• 1x omniPAGE Mini Vertical Unit which includes: 2x2mm thick notched glass plates, 2x2mm thick plain glass plates with 1mm thick bonded spacers, 1x dummy plate, 2x combs (1mm thick 12 samples), 1x casting base, silicone mat, cooling pack
• 1x Capillary electrophoresis module which includes: internal running module for tube gels, capillary tubes, blanking plugs, 2-D combs and spacers

Variant:

• CVS10C2DS - Complete Mini 2-D System including: Vertical unit, capillary insert & accessories.

• VS10WC2DS - Complete Mini Wide 2-D System including: Vertical unit, capillary insert & accessories.

• VS20WAVEC2DS - Complete WAVE Maxi 2-D System. Vertical unit, capillary insert & accessories.

2-D Combination Packages

 

Product Description

Available in Mini, Mini-Wide, Maxi, WAVE and Maxi-Plus size formats, the Cleaver 2-D combination packages allow you to combine the CSL-IEF-KIT 1-D Combination Package, including flat-bed IEF unit, chiller and power supply, with a second-dimension vertical of your choice.

2-D Strip Throughput: 2x7cm IPG Strips

Package Includes:

• Vertical of choice – see below.
• CSL-IEF
• CSL-CHILLER
• EV232
• CSL-4-2
• IPG Converter kits, including 2 sets of special 2-D combs for 2x7cm IPG strips and plates with 10mm bonded spacers

Variant:

• CSL-IEF-KIT-MINI               - CSL-IEF-KIT and CVS10DSYS

• CSL-IEF-KIT-MINIWIDE - CSL-IEF-KIT and VS10WDSYS and IPG Converter Kit

• CSL-IEF-KIT-WAVE             - CSL-IEF-KIT and WAVEDSYS and IPG Converter Kit

• CSL-IEF-KIT-MAXIPLUS  - CSL-IEF-KIT and VS30DSYS

OnmiPAGE Mini Tube Gel Unit

 

Product Description

These stand-alone, complete units for first dimension capillary/tube gel electrophoresis, Mini 10x10cm, Mini Wide 20x10cm and Maxi 20x20cm formats, include omniPAGE tank and lid, tube gel insert, tubes and blanking ports. Units are interchangeable with omniPAGE slab gel and electroblotting inserts.

Variant:

• VS10DC - omniPAGE Mini Tube Unit

OmniPAGE Mini Tube Wide Gel Unit

 

Product Description

These stand-alone, complete units for first dimension capillary/tube gel electrophoresis, Mini 10x10cm, Mini Wide 20x10cm and Maxi 20x20cm formats, include omniPAGE tank and lid, tube gel insert, tubes and blanking ports. Units are interchangeable with omniPAGE slab gel and electroblotting inserts.

Variant:

• VS10WDC - omniPAGE  Mini Wide, Tube Unit

OmniPAGE Maxi Tube Gel Unit

 

Product Description

These stand-alone, complete units for first dimension capillary/tube gel electrophoresis, Mini 10x10cm, Mini Wide 20x10cm and Maxi 20x20cm formats, include omniPAGE tank and lid, tube gel insert, tubes and blanking ports. Units are interchangeable with omniPAGE slab gel and electroblotting inserts.

• VS20DC - omniPAGE Maxi Tube Unit

OmniPAGE Mini Tube Gel Insert

 

Product Description

These stand-alone, complete units for first dimension capillary/tube gel electrophoresis, Mini 10x10cm, Mini Wide 20x10cm and Maxi 20x20cm formats, include omniPAGE tank and lid, tube gel insert, tubes and blanking ports. Units are interchangeable with omniPAGE slab gel and electroblotting inserts.

Variant:

• VS10DCI - omniPAGE Mini Tube Gel Insert – including 10 glass tubes

OmniPAGE Mini Tube Wide Gel Insert

 

Product Description

These stand-alone, complete units for first dimension capillary/tube gel electrophoresis, Mini 10x10cm, Mini Wide 20x10cm and Maxi 20x20cm formats, include omniPAGE tank and lid, tube gel insert, tubes and blanking ports. Units are interchangeable with omniPAGE slab gel and electroblotting inserts.

OmniPAGE Maxi Tube Gel Insert

 

Product Description

These stand-alone, complete units for first dimension capillary/tube gel electrophoresis, Mini 10x10cm, Mini Wide 20x10cm and Maxi 20x20cm formats, include omniPAGE tank and lid, tube gel insert, tubes and blanking ports. Units are interchangeable with omniPAGE slab gel and electroblotting inserts.