Contact Us

GENTAUR Europe

 GENTAUR Europe BVBA
Voortstraat 49, 1910 Kampenhout BELGIUM
Tel 0032 16 58 90 45 
Fax 0032 16 50 90 45
This email address is being protected from spambots. You need JavaScript enabled to view it.  

Gentaur Bulgaria

 GENTAUR BULGARIA
53 Iskar Str. 1191 Kokalyane, Sofia
Tel 0035924682280 
Fax 0035929830072
This email address is being protected from spambots. You need JavaScript enabled to view it.

    GENTAUR France

     GENTAUR France SARL
    9, rue Lagrange, 75005 Paris 
    Tel 01 43 25 01 50 
    Fax 01 43 25 01 60
    This email address is being protected from spambots. You need JavaScript enabled to view it.
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Gentaur Germany

      GmbH Marienbongard 20
    52062 Aachen Deutschland
    Tel (+49) 0241 56 00 99 68 
    Fax (+49) 0241 56 00 47 88 
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    This email address is being protected from spambots. You need JavaScript enabled to view it.

     

    Gentaur London

     GENTAUR Ltd. 
    Howard Frank Turnberry House 
    1404-1410 High Road 
    Whetstone London N20 9BH 
    Tel 020 3393 8531 
    Fax 020 8445 9411
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    GENTAUR Poland

     GENTAUR Poland Sp. z o.o. 

    ul. Grunwaldzka 88/A m.2

    81-771 Sopot, Poland
    Tel  058 710 33 44
    Fax 058 710 33 48 
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    GENTAUR Nederland

     GENTAUR Nederland BV
    Kuiper 1 
    5521 DG Eersel Nederland
    Tel 0208-080893 
    Fax 0497-517897
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Gentaur Italy

     GENTAUR SRL IVA IT03841300167

    Piazza Giacomo Matteotti, 6, 24122 Bergamo
    Tel 02 36 00 65 93 
    Fax 02 36 00 65 94
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    GENTAUR Spain

     GENTAUR Spain
    Tel 0911876558
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Genprice USA
    Gentaur Serbia

    serbiaSerbia, Macedonia FlagMacedonia, 

    montenegro-flagMontenegro, croatiaCroatia: 
    Tel 0035929830070 
    Fax 0035929830072
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    GENTAUR Romania

    romGENTAUR Romania

    Tel 0035929830070 
    Fax 0035929830072
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    GENTAUR Greece

    grGENTAUR Greece 

    Tel 00302111768494 
    Fax 0032 16 50 90 45

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Other countries

    Other countries
    Luxembourg +35220880274
    Schweiz Züri +41435006251
    Danmark +4569918806
    Österreich +43720880899
    Ceská republika Praha +420246019719
    Ireland Dublin +35316526556
    Norge Oslo +4721031366
    Finland Helsset +358942419041
    Sverige Stockholm +46852503438
    Magyarország Budapest +3619980547

    seal-in-search-symantec

     

     

    Articles

    Micro 1401 mk II and a Power 1401

    Micro 1401 mk II and a Power 14011Micro 1401 mk II and a Power 14012

    The Power1401 is faster, and has more instrumentation ports than the Micro. The Micro has the facilities and the speed that most users need, most of the time. The Power processor is typically some 3x faster and the base memory is 32x larger, enabling more complex on-line analysis, seen for example in spike shape recognition, where the both the number of channels and the number of templates can be increased, with much faster shape matching. The Power can manage 32 spike shape channels, the Micro 16. The Micro memory can be expanded from 1 to 2 MB; the Power memory from 32 to 256 MB. More memory stores bigger output waveforms and allows longer sweeps of captured data. The number of ports on both models can be considerably expanded, and for very large numbers of signals, several 1401s can be synchronised to each other, or to an external source. Waveform capture is comparably fast on both. The Micro, multi-channel, can run at 500 kHz, the Power at 625 kHz. The Power can have programmable gain for its waveform input and output. The Power1401 has 16 waveform input ports, compared with 4 waveform inputs on an un-expanded Micro. There is an option of programmable gain on all 16 inputs. There are 4 waveform outputs at 16 bit resolution on the Power 1401 and 2 at 12 bits on the Micro. The Power waveform outputs may be increased to 8 with an optional expansion unit. The Micro1401 is physically smaller, and somewhat lower in cost than the Power1401. 

    Spike2 is the data acquisition system of choice for thousands of researchers worldwide. Whether you require simple data capture or a complete package for experimental control using one of the CED 1401 family of data acquision peripherals, recording and analysis, Spike2 has many advantages over other data acquisition systems. Spike2 is easy to use as a general purpose capture and analysis package. You do not need to export data to another program for detailed analysis or to purchase add-on modules for specific tasks. Simple chart recorder type application with duplicated display showing zoomed screen Spike2 has the power and flexibility for demanding applications for which you would expect to require more specialised equipment, for example extracellular multi-electrode recording and complex stimulus timing and delivery. Spike2 has the sampling and analysis features most researchers need. There is also a built-in script language which allows automation of repetitive tasks and provides many additional tools for researchers who prefer to write their own applications. Spike2 can import data recorded by many other systems, so that you can take advantage of this extremely versatile software to analyse existing data. Spike2 can export data in spreadsheet format and as text or binary files. Additional export formats are planned.

    Features Navigate through your data quickly and simply using the intuitive user interface; zoom and scroll with the mouse or keyboard Record multiple data types, including waveforms, event times, coded markers, and discriminated single or multi-unit spike data in real-time Generate simple and complex protocols of waveform and TTL outputs Detect features manually or automatically and take measurements based on triggered and cyclical data such as cardiovascular signals. Analyse multiple channels of waveform and event data online and off-line Process data with functions including: filtering, rectification, interpolation and inter-channel arithmetic Spike2 has the power and flexibility for demanding applications for which you would expect to require more specialised equipment, for example extracellular multi-electrode recording and complex stimulus timing and delivery. Spike2 has the sampling and analysis features most researchers need. There is also a built-in script language which allows automation of repetitive tasks and provides many additional tools for researchers who prefer to write their own applications. Spike2 can import data recorded by many other systems, so that you can take advantage of this extremely versatile software to analyse existing data. Spike2 can export data in spreadsheet format and as text or binary files. Additional export formats are planned. Display and export images as you want them, with versatile display options including: triggered update and duplicated windows with independent time axes Record very large numbers of channels by synchronising multiple CED 1401s with no timing drift between them Customise the program with the built-in script language that provides control from simple automation to addition of complex analysis functions Spike2 for Windows version 6 requires a CED Power1401, a Micro1401 or a 1401plus intelligent laboratory interface, and a PC with Windows 98SE, Me, Windows 2000 or XP.